Sara
- Total activity 46
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Sara-
FreeMic W / Duo - Interactive Setup Guide (User Manual)
English: Interactive Setup Guide (English)German: Interaktiver Einrichtungsleitfaden (Deutsch)French: Guide d’installation interactif (Français)Italian: Guida interattiva alla configurazione (Itali...
-
FreeMic W / Duo– Compatibility with Speakers & Mixers
1. Which outputs can FreeMic W connect to?3.5mm AUX / MIC / Instrument input with volume knob (6.35mm) ✅Works with speakers or mixers that have a 3.5mm AUX input or a 6.35mm MIC/instrument input wi...
-
No Line-Out from Mixer?
Quick Fix (1 min)AirCast requires line-level input (not mic-level).If your mixer (e.g. Behringer PMP550) has no line-out, try this:✅ Solution 1 — Use Headphone Output (Recommended)Connect: Mixer he...
-
No Sound
Short AnswerMake sure your Oticon hearing aids have successfully joined the Auracast broadcast and the volume is turned up.Quick CheckConfirm your hearing aids have joined the Auracast broadcast st...
-
How Can I Improve Sound Clarity When Using Auracast with My Hearing Aids in Public Venues?
To achieve the best clarity in public venues, you may need to adjust the streaming settings in your hearing aid’s companion app. Below is an example using Starkey.In the My Starkey app:1️⃣ Adjust t...
-
AuraLink - Interactive Setup Guide (User Manual)
English: Interactive Setup Guide (English) German: Interaktiver Einrichtungsleitfaden (Deutsch)French: Guide d’installation interactif (Français)Italian: Guida interattiva alla configurazione (Ital...
-
AuraLink - How to Factory Reset / Clear Pairing History(Bluetooth)?
Power On: Turn on the device.Enter Pairing Mode: Press and hold the MFB button until the red and blue lights blink alternately.Reset: Double-click the MFB button. The LED will turn solid red and bl...
-
AuraLink- Buttons, Indicators & Functions Table
Buttons & FunctionsButtonActionFunctionMFB ButtonLong Press (3s)Enter Bluetooth Pairing Mode (LED flashes Red & Blue)Double PressClear pairing history LED IndicatorsLEDIndicatorsStatusBlinking red ...
-
AuraLink - Can’t Pair / Connect
Part 1. Classic Bluetooth – Cannot Pair1) Make sure AuraLink is in Bluetooth pairing modeBluetooth LED must be blinking red & blue.If not, press & hold MFB for 3s to enter pairing mode.2) Clear old...
-
AuraClip - Can connect to encrypted Auracast broadcasts?
No. AuraClip cannot connect to encrypted Auracast broadcasts.AuraClip does not use an app and does not support classic Bluetooth connections. Because of this, it cannot use an Android Auracast Assi...