AuraClip - How to Switch to Another Channel? – Venucast Support

Quick Answer

Save and switch between up to three broadcasts.

AuraClip saves up to three nearby Auracast broadcasts for quick switching. Press and hold the Channel or Hold–Switch Audio button to move to the next broadcast.

AuraClip showing the Hold-Switch Audio button on an earlier unit

Find the Channel / Hold–Switch Audio button

Newer units are labeled Channel. Earlier units are labeled Hold–Switch Audio.

HOLD

Press and hold the button

AuraClip switches to another saved broadcast or searches for a new one when needed.

Check the broadcast

Make sure another Auracast broadcast is active and within range.

Press and hold

Press and hold the Channel or Hold–Switch Audio button. The Audio LED flashes orange rapidly while searching and turns solid orange when connected.

Listen for the new audio

Release the button and check whether AuraClip switched to the broadcast you want.

How AuraClip chooses broadcasts

AuraClip can save up to three broadcasts.
When powered on, it reconnects to the last broadcast used.
If a saved broadcast is unavailable, it searches for a new one.
Search priority: names starting with VenuCast → Avantree → other broadcasts. Within the same group, the stronger signal is selected first.

Only one broadcast available?

The audio source will not change if no other Auracast broadcast is available.

Can’t find the broadcast you want?

Make sure the transmitter is on and within range.
Move closer to the transmitter.
Press and hold the same button again.

Still can’t switch broadcasts?

Tell us what happens when you press and hold the button, and we’ll help troubleshoot it.

ASK A QUESTION