AuraCoil - No Sound

If you cannot hear any audio through your AuraCoil, try the following:

1. Make sure AuraCoil is powered ON.
2. Set your hearing aid or cochlear implant to T or MT mode.
   AuraCoil works through the Telecoil (T-Coil) function of your hearing device.
3. Check the Auracast broadcast.
   Press CHANNEL to switch to another available public broadcast. Pause briefly after each press and listen before trying the next channel.
4. Increase the AuraCoil volume gradually.
5. Move closer to the Auracast transmitter and try again, especially if you are near the edge of the coverage area.
6. If you still hear nothing, ask the venue staff to confirm that the Auracast broadcast is active and publicly available.

Expected:
You should hear the venue’s Auracast audio through your hearing aid or cochlear implant.