T2 Support
- Total activity 38
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by T2 Support-
Harmony A0 – Volume Too Low?
If the sound is too low, adjust the volume from the following controls:TransmitterPress the “+” button on the Harmony A0 transmitter to raise the volume.SpeakersPress the “+” button on each speaker...
-
Harmony A0 – Factory Reset
Old Bluetooth pairings may block new connections; reset clears only classic Bluetooth, not Auracast connections.Quick Check 1️⃣ Turn on the speakerMake sure the Harmony A0 is powered on.2️⃣ Enter r...
-
Harmony A0 - Buttons, Indicators & Function Table
Product OverviewSpeakerButton Functions No. Button Function ① Hold 2s to turn on / off Double-press to switch between Auracast and Classic Bluetooth modes ② + / - Single-press to adjust...
-
Harmony A0 - Interactive Setup Guide (User Manual)
The Interactive Setup Guide (IUG) is a step-by-step walkthrough that helps you:Pair your Harmony A0Connect to TVs, audio sources, or AUX systemsSwitch between different input modes easilyTroublesho...
-
Harmony A0 Solo - Can’t Pair / Can’t Join Auracast
Part 1. Classic Bluetooth – Cannot Pair1) Make sure Harmony A0 Solo is in Bluetooth pairing mode LED must be blinking red & blue. If not, press & hold for 2s to enter pairing mode. 2) Clear old Blu...
-
Brand-by-Brand TV Optical/Digital Audio Settings Guide (Set to PCM)
If you’re connecting your Avantree transmitter to your TV using an optical cable or HDMI ARC, please set your TV’s digital audio output format to PCM.Don’t worry — it only takes a minute and you’ll...
-
Harmony A2 Solo - Can’t Pair / Can’t Join Auracast
Part 1. Classic Bluetooth – Cannot Pair1) Make sure Harmony A2 Solo is in Bluetooth pairing modeThe Bluetooth LED must be flashing red & blue.If not, press & hold the button for 3 seconds to enter ...
-
VoxAmp Lite - How to Fix the No Sound Issue?
If you're experiencing no sound from the amplifier, follow these steps to troubleshoot:Make sure the amplifier is powered on.Check that the audio source and cables are properly connected to the amp...
-
VoxAmp Lite - How to Fix Amplifier Howling?
If you're experiencing howling or feedback noise from the amplifier, follow these steps to resolve the issue:Reduce the volume slightly.Maintain a distance of at least 1 meter between the microphon...
-
VoxAmp Lite - How to Avoid Interference When Using Multiple Voice Amplifiers？
When multiple voice amplifiers or wireless microphones are used in the same room, wireless interference may cause noise or feedback.Recommended Solution: Use Microphone LockingAfter a microphone is...